REOVIB 6050
REOVIB Measuring equipment
Contains a REOVIB MFS frequency controller for vibratory conveyors and has been specially developed for use in servicing, construction and design of vibratory conveyors
Learn more
REOVIB
SWM 4000
Battery powered hand-held device
This handheld measurement unit is used to set up, test and service vibratory conveyor equipment
Learn more
REOVIB
MTS
phase angle controllers
Programmable
The REOVIB MTS series includes single-channel, two-channel and three-channel control units for vibratory conveyor drives
Learn more

REOVIB Measuring equipment

REOVIB SWM 843

Monitoring device for vibrating feeders

The REOVIB SWM 843 monitoring device measures and displays the vibration performance of vibratory feeders. The vibration is monitored using an accelerometer and the instantaneous measured values are indicated on the five-digit seven-segment display, as a value of acceleration [g], vibration amplitude [mm] or vibration frequency [Hz]. The acceleration value is also provided as a 0 (4)… 20 mA analogue output for direct connection to a measurement instrument, or for connection to an external measurement device e.g. a PLC controller for evaluation or monitoring.

REOVIB SWM 843

Monitoring device for vibrating feeders

The REOVIB SWM 843 monitoring device measures and displays the vibration performance of vibratory feeders. The vibration is monitored using an accelerometer and the instantaneous measured values are indicated on the five-digit seven-segment display, as a value of acceleration [g], vibration amplitude [mm] or vibration frequency [Hz]. The acceleration value is also provided as a 0 (4)… 20 mA analogue output for direct connection to a measurement instrument, or for connection to an external measurement device e.g. a PLC controller for evaluation or monitoring.

 


REOVIB SWM 1000

Acceleration and vibration amplitude sensor for vibrating feeders

The REOVIB SWM 1000 sensor is designed to monitor vibratory feeders. The sensor measures the acceleration of a magnetically or motor driven vibrating feeder and supplies 0 (4)… 20 mA outputs for vibrational acceleration [g] and vibration amplitude [mm]. The output of the sensor can be connected directly to a measuring instrument (with 0 (4)… 20 mA input) or to a PLC controller for evaluation or monitoring.

REOVIB SWM 1000

Acceleration and vibration amplitude sensor for vibrating feeders

The REOVIB SWM 1000 sensor is designed to monitor vibratory feeders. The sensor measures the acceleration of a magnetically or motor driven vibrating feeder and supplies 0 (4)… 20 mA outputs for vibrational acceleration [g] and vibration amplitude [mm]. The output of the sensor can be connected directly to a measuring instrument (with 0 (4)… 20 mA input) or to a PLC controller for evaluation or monitoring.

 


REOVIB SWM 4000

Hand-held instrument for checking and testing vibratory conveyors

The REOVIB SWM 1000 sensor is designed to monitor vibratory feeders. The sensor measures the acceleration of a magnetically or motor driven vibrating feeder and supplies 0 (4)… 20 mA outputs for vibrational acceleration [g] and vibration amplitude [mm]. The output of the sensor can be connected directly to a measuring instrument (with 0 (4)… 20 mA input) or to a PLC controller for evaluation or monitoring.

REOVIB SWM 4000

Hand-held instrument for checking and testing vibratory conveyors

The REOVIB SWM 1000 sensor is designed to monitor vibratory feeders. The sensor measures the acceleration of a magnetically or motor driven vibrating feeder and supplies 0 (4)… 20 mA outputs for vibrational acceleration [g] and vibration amplitude [mm]. The output of the sensor can be connected directly to a measuring instrument (with 0 (4)… 20 mA input) or to a PLC controller for evaluation or monitoring.

 


REOVIB Messbox 122

Analog instrument with moving-iron meters

The REOVIB Testbox 122 is designed to provide accurate indications of voltage and current, when servicing and testing vibratory conveyors. The devices are fitted with moving-iron meters and external connectors are provided to allow fast and safe connection of the feeder and controller.

REOVIB Messbox 122

Analog instrument with moving-iron meters

The REOVIB Testbox 122 is designed to provide accurate indications of voltage and current, when servicing and testing vibratory conveyors. The devices are fitted with moving-iron meters and external connectors are provided to allow fast and safe connection of the feeder and controller.

 


REOVIB 6050

Workshop equipment used for servicing and manufacturing of vibratory conveyors

The REOVIB 6050 workshop device contains a REOVIB MFS frequency controller for vibratory conveyors and has been specially developed for use in servicing, construction and design of vibratory conveyors. For rapid control, the desired value of vibration amplitude is adjustable by means of a potentiometer and an integrated ammeter provides indication of the feeder running current.

REOVIB 6050

Workshop equipment used for servicing and manufacturing of vibratory conveyors

The REOVIB 6050 workshop device contains a REOVIB MFS frequency controller for vibratory conveyors and has been specially developed for use in servicing, construction and design of vibratory conveyors. For rapid control, the desired value of vibration amplitude is adjustable by means of a potentiometer and an integrated ammeter provides indication of the feeder running current.


REOVIB 6100

Workshop and diagnostic equipment used for thedevelopment, construction and quality control of vibrato-ry conveyors

REOVIB 6100 workshop and diagnostic unit is a microprocessor-controlled device. An integrated REOVIB MFS frequency units controls the feeder, while simultaneously determining vibration frequency [Hz], vibration amplitude [mm], vibrational velocity [cm/s] and vibrational acceleration [g]. The values are shown on the integrated LCD display and can also be stored in the equipment (40 measured values). The integrated USB interface can transfer this saved data to a PC, within a file, for further analysis. The operating frequency of the conveyor can be set manually or can be determined independently using a vibration amplitude sensor with an automatic frequency search.

REOVIB 6100

Workshop and diagnostic equipment used for thedevelopment, construction and quality control of vibrato-ry conveyors

REOVIB 6100 workshop and diagnostic unit is a microprocessor-controlled device. An integrated REOVIB MFS frequency units controls the feeder, while simultaneously determining vibration frequency [Hz], vibration amplitude [mm], vibrational velocity [cm/s] and vibrational acceleration [g]. The values are shown on the integrated LCD display and can also be stored in the equipment (40 measured values). The integrated USB interface can transfer this saved data to a PC, within a file, for further analysis. The operating frequency of the conveyor can be set manually or can be determined independently using a vibration amplitude sensor with an automatic frequency search.

 

Contact und product inquiry

    We are there for you

    Do you have questions, requests or suggestions?
    Please don’t hesitate to contact us:

    REO AG

    Brühler Strasse 100
    D-42657 Solingen

    Tel.: 0049-(0)2 12-88 04-0
    Fax: 0049-(0)2 12-88 04-188

    E-Mail: info@reo.de

    USt-ID-Nr.: DE 182 486 130
    St.-Nr.: 128/5819/5634

    This site is also available in: German