REOVIB MFS

The frequency converters for the REOVIB MFS series of vibratory conveyor technology permit optimum vibration frequency for all conveyed goods in any application

REOVIB MFS 158/168

Frequency converters in the REOVIB MFS 158 andREOVIB MFS 168 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material – completely independently of the mains input frequency.It is also possible with REOVIB MFS 168, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude accordingly. In addition, various sensor and valve logic links can be programmed.

Devices in the REOVIB MFS 158 series are available with a max. output current of 4A and the Devices in theREOVIB MFS 168 series are available with a max. output current of 3A, 6A and 8A. Both series are available as IP20 versions for installation in control cabinets or as IP54 standalone units.The IP54 housings are available with various connection options:

  • Input cable/output cable
  • Input cable/output socket
  • Complete cable connection solution for mains, output and control connections

Advantages:

  • Inexpensive frequency-control devices with the vitalfunctionality
  • Frequency-control device for controlling a vibratoryconveyor independently of the mains input frequency
  • Conveyor frequencies adjustable between 35…140 Hz
  • Mains voltage compensation with constant vibrationamplitude
  • All settings can be made using the integrated display
  • Sinusoidal output current
  • Can be used on 110 V or 240 V mains, auto sensing
  • User settings can be stored
  • With fill level/overflow control
  • Versions available in various protection classes and with various connection options

REOVIB MFS 168:

  • Automatic detection of the resonant frequency of the vibratory conveyor system (with additio-nal vibration amplitude sensor) and option to regulate the vibration amplitude – Constant feed rates can be achieved independently of load or changes in the mechnical system

Typical applications:

Conveyor & assembly automation, Sorting systems

Our experts suggest the following AC-Magnets:

WI 111, WI 121, WI 321, WI 421, WI 621, WI 211, WE 131

Certifications:

REOVIB MFS 158

IP 20/ 54

REOVIB MFS 168

IP 20/ 54

Sensor SW

IP 65





REOVIB MFS 268 (HP)

Frequency converters in the REOVIB MFS 268 seriesfor vibratory conveyor technology offer the option ofoperating the vibratory conveyor at an optimal vibrationfrequency for the material – with a wide input voltage range of 110 V to 230 V -completely independently of the frequency of the electrical mains supply. It is moreover possible, thanks to the system patented by REO, to determine the resonant frequency of the vibratory system automatically and to regulate the vibration amplitude to constant values.

Devices can optionally be equipped with field bus interfaces, and are also available as versions with UL/ CSA certification.

Devices in the REOVIB MFS 268 series are available with a max. output current of 3A, 6A, 8A, as IP20 versions for installation in switch cabinets, and also as IP54 case designs. The IP54 housing can be supplied with various connection options:

  • Input cable/output cable
  • Input cable/output socket
  • Complete cable connection solution for mains, output and control connections

Advantages:

  • REO frequency units are able to control a vibratory conveyor independently of the mains input frequency
  • Automatic search of the resonant frequency of thevibratory conveyor system (with additional vibration ampli-tude sensor) and option of regulating vibration amplitude- Able to regulate the vibration amplitude to maintain a constant feedrate irrespective of load or changes in the mechanical system
  • Can be supplied with field bus interfaces: ProfiNet,EtherNet/IP, EtherCAT, CAN-Bus, ProfiBus, DeviceNet
  • Optional versions available with UL/CSA accreditation
  • Conveyor frequencies adjustable between 5…300 Hz
  • Mains voltage compensation with constant vibrationamplitude
  • All settings can be made using the integrated display
  • Sinusoidal output current
  • Can be used on 110 V or 240 V autom. Detection
  • User settings can be stored
  • Fill level/overflow control
  • Versions available in various protection classes and with various connection options
  • MFS 269 is availble with AC output signal for use with permanent-magnet armature

Advantages of the high-power version 268 HP

  • Can be used on 230 V or 400 V mains input
  • MFS 269 HP is availble with AC output signal for use with permanent-magnet armature

Our experts suggest the following AC-Magnets:

WI 111, WI 121, WI 421 (6000 1/min, 3000 1/min), WI 621 (6000 1/min, 3000 1/min), WI 211, WE 131

Certifications:

Typical applications:

Conveyor & assembly automation, sieving technology, filling and packaging technology

REOVIB MFS 268

IP54 (with heat sink 6 A) and IP20 with ProfiNet*

REOVIB MFS 268 HP

IP54 / IP20



*Also available with the following interfaces: EtherCat, Ethernet / IP, Profinet, Profibus, CAN-Bus, DeviceNet


REOVIB MFS 368

More technology in the same form – this is the motto of the new REOVIB MFS 368. The new devices consume up to 45% less electricity. This means that they do not only offer a better energy footprint, but also lower operating costs. This has been achieved by reactive power compensation. The lower power consumption is more eco-friendly thanks to the reduction in CO² emissions.

The frequency converters also have impressive effects on the conveying technology, with a wide input voltage range of 99 V to 264 V for a consistent output voltage of 250 V max. They also make it possible to operate the vibratory feeder at the optimal vibration frequency for the conveyed goods, completely independently of the frequency of the supply electrical network. The device can therefore be used worldwide. Where several different conveyors or magnets would have been required in the past, one REOVIB MFS 368 can now get the job done.

It is also possible to automatically determine the resonance frequency of the vibration system and control the vibration amplitude to set it at constant values by implementing the REO-patented ACC control procedure. The benefit of this is that the conveyor automatically works at the optimum conveying capacity independently of the load or mechanical settings. No time-consuming adaptation of the conveyor is required. The new REOVIB MFS 368 means that optimum and maximum conveying performances can be consistently achieved, such as when springs age or with changing mechanical loads or voltage fluctuations.

The new converter has an integrated active network filter, saving on additional costs for an external network filter and reducing power consumption. It also has an LCD display which shows full text. A temperature sensor for magnets can be connected if required to guarantee that there are no failures due to defective magnets and to increase the operational safety of the units.

The devices can be equipped with field bus interfaces if necessary and are also available in designs with UL/CSA certification. This permits simple use without unnecessary effort and tests in units in the USA and Canada.

The devices of the REOVIB MFS 368 series are available with amax. output current of 3 A, 6A , 8 A as IP20 variant for switchcabinet installation as well as IP54 housing version. The IP54enclosures can be supplied with various connection options:

  • Input- and output cable
  • Input cable and output plug
  • Completely pluggable with input- and output plug and sensor connectors

Advantages:

  • Reduction of harmonics and thus of mains interferences
  • Energy efficiency through reactive power compensation
  • Active power is taken from the supply network
  • Output voltage of 205 V with an input voltage range from99 V to 264 V
  • LCD display with full text menu
  • Short-circuit detection
  • Short-circuit detection
  • Possibility (as an option) of connecting an external thermalcontact for temperature monitoring of the magnets
  • Extra 24 V valve outlet as an option
  • The Device can be configured according to yourrequirements

Our experts suggest the following AC-Magnets:

WI 111, WI 121, WI 421 (6000 1/min, 3000 1/min), WI 621 (6000 1/min, 3000 1/min), WI 211, WE 131

Certifications:

Schnittstellen:

Typical applications:

Conveyor & assembly automation, sieving technology, filling and packaging technology

REOVIB MFS 368

IP200 with interfaces / IP54



The NEW REOVIB MFS 368

REO AG again sets the benchmark with the product launch of the REOVIB MFS 368 series of controllers

REO is launching the world’s most advanced vibratory feeder control system in early 2020, the REOVIB MFS 368. Having a compact design, it combines a wide range of applications with a wide range of security mechanisms and interfaces.

“During the development of the REOVIB MFS 368 we maintained close contact with our customers and partners in order to meet future requirements within the field of Industry 4.0 today. Thanks to the cooperation of our developers at REO and the technicians of the REO Digital Connect 4.0, a startup of REO, which deals exclusively with digitisation and device communication with regard to Industry 4.0, completely new approaches were taken,” concludes Mr. Jörg Rohden, board member and Head of Product Development. “The result is the most state-of-the-art and future-proof control system for vibratory conveyor technology on the market.”

With a range of 110 to 230 volts input while maintaining a constant 205 volt

Contact und product inquiry

    We are there for you

    Do you have questions, requests or suggestions?
    Please don’t hesitate to contact us:

    REO AG

    Brühler Strasse 100
    D-42657 Solingen

    Tel.: 0049-(0)2 12-88 04-0
    Fax: 0049-(0)2 12-88 04-188

    E-Mail: info@reo.de

    USt-ID-Nr.: DE 182 486 130
    St.-Nr.: 128/5819/5634

    This site is also available in: German